透水磚的鋪貼步驟要注意什么？
素土夯實：在鋪設透水磚前，需要先將素土夯實，以保證鋪貼的基面平整、牢固。
Plain soil compaction: Before laying permeable bricks, it is necessary to first compact the plain soil to ensure that the laid foundation is flat and firm.
鋪設碎石層：在素土夯實的基礎上，鋪設一層碎石子，并用振動機將其鋪平壓實，碎石層厚度一般在10厘米左右。
Laying crushed stone layer: On the basis of compacted plain soil, lay a layer of crushed stones and use a vibrating machine to flatten and compact them. The thickness of the crushed stone layer is generally about 10 centimeters.
鋪設無紡布：在碎石層上面鋪無紡布，以增強透水磚的透水效果和穩定性。
Laying non-woven fabric: Lay non-woven fabric on top of the gravel layer to enhance the permeability and stability of the permeable brick.
鋪設河沙：在無紡布上鋪設一層河沙，以找平地面并確保透水磚的平整度。
Laying river sand: Lay a layer of river sand on non-woven fabric to level the ground and ensure the flatness of permeable bricks.
放置透水磚：將透水磚放在預先確定好的位置，用橡皮錘將其敲實固定住。
Placing permeable bricks: Place the permeable bricks in a predetermined position and secure them with a rubber hammer.
填充縫隙：在透水磚表面灑細沙將縫隙填充好，并用輥壓機把透水磚壓實。
Filling the gap: Sprinkle fine sand on the surface of the permeable brick to fill the gap, and use a roller press to compact the permeable brick.
檢查平整度：使用水平儀或靠尺等工具檢查地面是否平整，一般透水磚表面平整度誤差在3-5毫米，都屬于合理范圍。
Check flatness: Use tools such as a spirit level or ruler to check if the ground is flat. Generally, the surface flatness error of permeable bricks is within a reasonable range of 3-5 millimeters.
請根據實際情況調整具體步驟，必要時咨詢人士。
Please adjust the specific steps according to the actual situation and consult professionals if necessary.
上一篇：山東溝蓋板的安裝事項包括哪些？
下一篇：消防車道的植草磚施工要注意什么？
相關產品
相關新聞
資訊推薦Information
聯系我們Information
- 濟南龍岳建材有限公司
- 電話：13905418708
- 地址：濟南章丘區棗園街道吉祥村工業園
