仿石，顧名思義是一種仿造天然石材的人造材料，而應用于路側石的仿石必須具備符合要求的石材特性。仿石人造石主要有兩種類型：有機人造石和無機人造石。一般來說，室外應用要求更高，通常采用無機人造石，其特點有類純天然的外觀并能達到相應技術要求的石材特性。因路側石一般應用于道路的隔斷圍護，需適應冷熱交替或者夏季雨水和冬季冰凍的路面，較冷地區還要考慮耐鹽凍，因此路側石的應用就要求具有較高的密度，強度和較小的吸水率等要求。因有機材料膠凝固化一般是冷-熱樹脂，只能應用于室內。所以目前只有無機材料的仿石人造石材質才能適合于室外應用。

Imitation stone, as the name suggests, is an artificial material that imitates natural stone, and the imitation stone used in roadside stones must have the required stone characteristics. There are two main types of imitation stone artificial stones: organic artificial stones and inorganic artificial stones. Generally speaking, outdoor applications require higher requirements, usually using inorganic artificial stones, which have a natural appearance and can meet the corresponding technical requirements of stone characteristics. Due to the fact that curbstones are generally used for road partition and enclosure, they need to adapt to cold and hot alternations, summer rainwater, and winter freezing road surfaces. In colder areas, salt frost resistance should also be considered. Therefore, the application of curbstones requires high density, strength, and low water absorption. Due to the fact that organic materials are generally cured by cold hot resins, they can only be applied indoors. So currently, only inorganic materials such as imitation stone and artificial stone materials can be suitable for outdoor applications.

每年城鎮道路建設需要大量的路側石，目前市場上應用的路側石也絕大部分是天然石，在資源綜合利用政策的嚴控之下，礦山開采不斷減少，天然石的積極利用率也越來越高，造成了路側石這種普通公共材料供應困難，有些地方一石難求。而仿石路側石可以利用礦山尾渣，建筑廢料再加工利用生產，不但可以解決環保問題而且可以創造不同的經濟價值，同時也能為踐行綠水青山做貢獻。

Every year, urban road construction requires a large amount of roadside stones, and the vast majority of roadside stones currently used in the market are natural stones. Under the strict control of resource comprehensive utilization policies, mining is continuously decreasing, and the active utilization rate of natural stones is also increasing. This has caused difficulties in the supply of roadside stones, a common public material, and in some places, it is difficult to obtain one stone. Imitation stone roadside stones can be produced by utilizing mining tailings and building waste for further processing and utilization. This not only solves environmental problems but also creates different economic values, while also contributing to the practice of green mountains and clear waters.

采用濕法真空負壓高壓加壓成型生產工藝，生產過程采用PC控制，動作由伺服驅動，生產過程自動化高。生產制品密度高，生產過程穩定，仿真性強，生產線設計采用多工位全閉環自動線工藝，具有成品率高等特點。機器更換模具也可生產規格范圍內的板材，支持分層布料，二次布料，內置鋼筋等輔助選擇性功能。

The production process adopts a wet vacuum negative pressure high-pressure compression molding process, which is controlled by PC and driven by servo, resulting in high automation of the production process. The production density of products is high, the production process is stable, and the simulation is strong. The production line design adopts a multi station fully closed loop automatic line process, which has the characteristics of high yield. Machine replacement of molds can also produce boards within the specified range, supporting layered fabric, secondary fabric, built-in steel bars and other auxiliary selective functions.

本文由山東仿石路沿石提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.cpw944.cn ，我們將會全心全意為您提供滿意的服務。

This article is provided with technical support by Shandong Fangshi Roadside Stone. For more detailed and exciting content, please click on our website http://www.cpw944.cn We will wholeheartedly provide you with satisfactory service.